Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Acura
  4. :
  5. Acura Tlx
  6. : Front bumper

Acura Tlx - Front bumper

Acura Tlx (2015-2020 / MK 5)
How do you remove the front bumper of your Acura TLX?

To be able to remove the front bumper of the Acura TLX you have to unscrew its fixing screws: these will be found in the upper part of the piece, which will be …read all…
Posted on 31 May 2023 by ScegliAuto
Acura Tlx (2015-2020 / MK 5)
Disassembly of the front bumper of the Acura TLX

In today's video tutorial we will see how to remove and replace the front bumper of the Acura Tlx, in simple and quick steps. First we open the front bumper …read all…
Posted on 25 April 2024 by ScegliAuto

Battery (5) Key (5) -board computer (1) Checks and maintenance (3) Headlight (1) Tail light (1) Air filter (2) Cabin air filter (4) Grille (1) Engine oil (2) Front bumper (2) Brake pads (1) Door (1) Instrument cluster (1) Manufacturer's coat of arms (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos