Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Acura
    3. :
  3. Acura Tlx
    4. : Manufacturer's coat of arms

Acura Tlx - Manufacturer's coat of arms

Acura Tlx (2015-2020 / MK 5)
How to replace the logos in the Acute TLX
In today's video we will see how to remove all the logos in the Acura Tlx, to replace them with new units of different coloring. We wrap the thread and proceed …read all…
Posted on 7 May 2023 by ScegliAuto
Battery (5) Key (5) -board computer (1) Checks and maintenance (3) Headlight (1) Tail light (1) Air filter (2) Cabin air filter (4) Grille (1) Engine oil (2) Front bumper (2) Brake pads (1) Door (1) Instrument cluster (1) Manufacturer's coat of arms (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos