Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Acura
    3. :
  3. Acura Tlx
    4. : Cabin air filter

Acura Tlx - Cabin air filter

Acura Tlx (2015-2020 / MK 5)
How to replace the cabin air filter on an Acura TLX.
In this video tutorial, we can see how to replace the cabin air filter on an Acura TLX, following a few simple steps: the first thing to do is to purchase a …read all…
Posted on 7 June 2023 by ScegliAuto
Acura Tlx (2015-2020 / MK 5)
How to replace a cabin filter on Acura TLX
In this video tutorial we can see how it is possible to replace the cabin filter on Acura TLX, following some simple steps: the filter must be replaced after …read all…
Posted on 26 August 2022 by ScegliAuto
Acura Tlx (2015-2020 / MK 5)
How do I replace the cabin filter on the Acura TLX?
In order to replace the cabin filter of the Acura TLX you have to go to open the glove box located on the passenger side, so that you have access to its rear …read all…
Posted on 5 May 2024 by ScegliAuto
Acura Tlx (2015-2020 / MK 5)
How to replace the cabin filter in the Acura TLX?
In this tutorial we can see how to replace the cabin air filter in the Acura TLX, a very simple and fast operation. It is located behind the glove compartment …read all…
Posted on 25 April 2024 by ScegliAuto
Battery (5) Key (5) -board computer (1) Checks and maintenance (3) Headlight (1) Tail light (1) Air filter (2) Cabin air filter (4) Grille (1) Engine oil (2) Front bumper (2) Brake pads (1) Door (1) Instrument cluster (1) Manufacturer's coat of arms (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos