Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter on the Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Air filter

Video tutorial

The steps to replace the air filter of the Alfa Romeo Giulietta are simple and quick to perform independently. To replace the filter, we must first remove the lower cover of the car, removing the tightening clips.

Pay attention during the removal of the clips. Then unscrew the bolt that secures the air filter cover, located to the right of the intake tube.

We then remove the filter and insert the new one. Tighten the nut and reassemble the lower cover of the vehicle. Once the above steps have been completed, you can start the vehicle without any noise or burning smell inside.


Posted on 6 January 2025 by ScegliAuto


Related tutorials

How to Replace the Air Filter of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Unlike many other car models, the air filter of the Alfa Romeo Giulietta is not located in the upper area of the engine bay but rather in the lower a…
How to replace the cabin air filter in the Alfa Romeo Giulietta
How to replace the cabin air filter in the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In the Alfa Romeo Giulietta, the cabin air filter is located at the bottom, near the passenger side floor mat. First, in order to replace this filter…
How to Replace the Air Filter in an Alfa Romeo Giulietta
How to Replace the Air Filter in an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In today's video, we will see how to replace the original air filter with a more performance-oriented one in the Alfa Romeo Giulietta. Start by remov…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos