Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on the Alfa Romeo 146

Model: Alfa Romeo 146 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Transmission

Video tutorial

Today, you will learn how to replace the gear knob on an Alfa Romeo 146. To remove the knob, rotate the top part counterclockwise. For the bottom part, use WD40 spray for lubrication and a pair of pliers.

After removing the bottom part of the knob, clean with degreaser to remove any oil residue. If necessary, replace the gear spring.

Otherwise, refit the knob by inserting it into the mechanism and pushing down. First, apply lubricant inside to help the knob slide better into the mechanism.

Once the knob is inserted, move the gear lever through the gears to test its operation.


Posted on 28 October 2026 by ScegliAuto


Related tutorials

What is the fuse diagram and where is the fuse box of an Alfa Romeo 146?
Alfa Romeo 146 (1995-2001 / MK 1) The attached video shows the positioning diagram of all the fuses in our Alfa Romeo 146. Fuses prevent damage to the vehicle's electrical components …
Where to Find the Fuse Box of the Alfa Romeo 146
Where to Find the Fuse Box of the Alfa Romeo 146
Alfa Romeo 146 (1995-2001 / MK 1) If you own an Alfa Romeo 146 and do not know where the fuse box containing all the fuses is located, do not worry as this guide provides all the nece…
How to replace a fuse in an Alfa Romeo 146
How to replace a fuse in an Alfa Romeo 146
Alfa Romeo 146 (1995-2001 / MK 1) Before you begin, open the bonnet of your Alfa Romeo 146 and disconnect one terminal of the battery for safety. Start by unclipping and removing the …

How to Remove the Rear Hatch Cover of the Mercedes B-Class

In this video, you will learn how to remove the rear hatch cover of the Mercedes B-Class. You will need a small flathead screwdriver to remove the handle cover. Use long-nosed pliers to gently remove the clips inside. The next step is to carefully insert a plastic spatula into the gap created to start removing the cover; it is advisable to start from the sides and work towards the centre. Disconnect the courtesy light connector, and continue gently removing the plastics by leveraging the gaps created, always starting from the sides. Be cautious of clips and wiring, and handle everything with care.

Watch the video!


by ScegliAuto

More videos