Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Service Light on Alfa Romeo Cars

Model: Alfa Romeo Alfa Romeo Stelvio MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Warning light – error code

Video tutorial

Reset the service light on the Alfa Romeo Stelvio and other Alfa Romeo cars made in the same years is a very simple operation. To do this, you do not need to lift the hood or start the engine: just turn on the ignition.

After that, press the brake pedal three times within ten seconds. Turn off the ignition and turn it back on shortly after to verify success.

It is recommended not to use this procedure as a substitute for regular maintenance, but rather to use it if you perform maintenance at home without going to the shop and therefore need this reset procedure.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

Service Reset on an Alfa Romeo Stelvio
Service Reset on an Alfa Romeo Stelvio
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) Today, you will see, thanks to this very useful video guide, the entire step-by-step procedure to reset the service light on an Alfa Romeo Stelvio. T…
How to Reset the Service Light on the Alfa Romeo Stelvio?
How to Reset the Service Light on the Alfa Romeo Stelvio?
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) To reset the Service light on the Alfa Romeo Stelvio, turn on the ignition by inserting the key into the ignition switch. Once the dashboard is power…
How to Reset the Service Light on the Alfa Romeo Stelvio?
How to Reset the Service Light on the Alfa Romeo Stelvio?
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) To reset the Service light on the Alfa Romeo Stelvio, press the accelerator pedal and then press the brake pedal six times. After this operation, tur…

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos