Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 156
    4. : How do you remove the exterior rearview mirror of the Alfa Romeo 156?

Alfa Romeo 156 - Video tutorial

Model: Alfa Romeo 156 MK 1 - Years 1997-2007
Part: Outside rearview mirror
Operation: How do you remove the exterior rearview mirror of the Alfa Romeo 156?

In order to remove the exterior rearview mirror of the Alfa Romeo 156 you have to remove the triangular plastic cover, which is located on the inside of the door. Below it, there will be three ten-piece bolts that need to be loosened with the appropriate wrench. At the same time it will be necessary to disconnect the cable that connects the mirror to the rest of the door, opening the appropriate clip. Once the bolts have been loosened and the cable disconnected, the exterior rearview mirror can be removed. To mount a new one, just follow the previous operations in reverse.


Posted on 22 February 2024 by ScegliAuto



How do you remove the rearview mirror of the Alfa Romeo 156?
Alfa Romeo 156 (1997-2007 / MK 1) In order to replace the exterior rearview mirror of the Alfa Romeo 156 you need to remove the triangular plastic cover located in the internal part c
How to replace the coolant reservoir on an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) This procedure is only to be carried out with the engine off. Let's start by opening the front hood of our Alfa Romeo 156. After that, we will have t
How to replace the battery of the Alfa Romeo 156 key
Alfa Romeo 156 (1997-2007 / MK 1) If you own an Alfa Romeo 156 and want to find out how to replace the button cell battery inside the key, all you have to do is read the following gui

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos