Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on the Alfa Romeo 147

Model: Alfa Romeo 147 MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Door trim panel

Video tutorial

In this video, learn how to remove the rear door panel on the Alfa Romeo 147 by following these simple and quick steps. First, open the door and start by removing the plastic covers on the panel, found on both the opening handle and the grab handle; then unscrew all the fixing screws located underneath, as shown in the video.

At this point, remove the window switch by disconnecting the electrical connector, and pry at the edges of the panel to detach it; finally, remove it, following the video to the end for the disassembly of the door pull!


Updated on 23 April 2026 by ScegliAuto


Related tutorials

Removing the Front Door Panel of the Alfa Romeo 147
Removing the Front Door Panel of the Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) In today's video, you will see how to remove and replace the front door panel of the Alfa Romeo 147, as well as the GT. First, open the front door an…
Dismantling the door panel of the Alfa Romeo 147
Dismantling the door panel of the Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) In this video tutorial, we will see how to dismantle the door panel of an Alfa Romeo 147. First, open the door and then remove all the caps covering …
How to Remove the Front Door Panel of an Alfa Romeo 147
How to Remove the Front Door Panel of an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Before starting, open the front door of your Alfa Romeo 147. Begin by uncliping and removing the window switch button, then disconnect the correspond…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos