Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in an Alfa Romeo Stelvio

Model: Alfa Romeo Alfa Romeo Stelvio MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Car stereo

Video tutorial

To replace the radio in an Alfa Romeo Stelvio, use a tool to pry off the plastic covers surrounding the instrument cluster. This will allow you to loosen the screws underneath and remove the cluster from its housing.

Next, move the plastics along the dashboard that surround the radio to access the screws securing the radio, so you can pull it out. Disconnect the connectors at the back and install the new unit by connecting and securing it.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery in an Alfa Romeo Stelvio
How to Replace the Key Battery in an Alfa Romeo Stelvio
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) Start by prying off and removing the back of the key fob for your Alfa Romeo Stelvio to extract the physical emergency key. Next, using the extracted…
Where to Find the OBD Port in the 2018 Alfa Romeo Stelvio
Where to Find the OBD Port in the 2018 Alfa Romeo Stelvio
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) To access the OBD port in your 2018 Alfa Romeo Stelvio, follow the steps outlined in this guide. First, open the driver's side door and enter the veh…
What is the fuse diagram and where is the fuse box located in an Alfa Romeo Stelvio?
What is the fuse diagram and where is the fuse box located in an Alfa Romeo Stelvio?
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) The attached video shows the exact diagram and placement of the fuses in our Alfa Romeo Stelvio. Fuses prevent damage to the vehicle's electrical com…

Other guides you may be interested in

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos