Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Cabin air filter

In this video tutorial, you will see how to replace the cabin filter on the Alfa Romeo Giulietta by following a few simple steps: First, buy a new cabin filter. Next, get inside the vehicle and switch off the engine, pulling the handbrake. The filter is located on the passenger side, under the glove compartment, on the left side. Detach the fasteners of the air diffuser cover on the passenger side. Under the glove compartment, unclip the 4 fasteners of the carpet panel. On the outer part of the filter cover, push down the tabs; now you can extract the old filter, clean the housing, and position the new filter, following the arrow indications that show the airflow direction.

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter in an Alfa Romeo Giulietta
How to Replace the Cabin Filter in an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In this tutorial, we can see how to replace the cabin filter in an Alfa Romeo Giulietta, a very simple and quick operation. First, go to the passenge…
How to Replace the Air Filter of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Unlike many other car models, the air filter of the Alfa Romeo Giulietta is not located in the upper area of the engine bay but rather in the lower a…
How to replace the cabin air filter in the Alfa Romeo Giulietta
How to replace the cabin air filter in the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In the Alfa Romeo Giulietta, the cabin air filter is located at the bottom, near the passenger side floor mat. First, in order to replace this filter…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos