Do it yourself
Frequently asked questions about cars and motorcycles

How to Monitor DPF Blockage on the Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Diesel particulate filter

Video tutorial

Let’s see how to monitor potential blockages of the diesel particulate filter (DPF) on the Alfa Romeo Giulietta: The DPF filter is designed to trap all the pollutants produced by the diesel engine; when the filter becomes blocked, the ECU automatically initiates a regeneration process to clean the filter.

If the vehicle fails to regenerate, the diesel injected into the filter for this cleaning can lead to severe engine combustion issues.

There is a mobile application that can be accessed via an OBD2 reader, allowing you to view the blockage percentage of the filter. If the warning light comes on indicating that the vehicle needs regeneration, Alfa Romeo suggests driving for about 15 minutes at 2,000 RPM in 5th gear on the motorway (around 80 mph) to raise the temperature of the DPF. Therefore, use your OBD2 reader (available at various prices on major e-commerce platforms, starting from £19.00). The application is only for Android phones and is called "ALFADPF". Connect the OBD2 reader, turn on the ignition, and open the app. It shows how blocked the DPF is and many other parameters.

This application is very useful for those who primarily use it in the city.


Updated on 15 August 2026 by ScegliAuto


Related tutorials

Alfa Romeo Giulietta (2010-2020 / MK 1) Unlike many other car models, the air filter of the Alfa Romeo Giulietta is not located in the upper area of the engine bay but rather in the lower a…
Alfa Romeo Giulietta (2010-2020 / MK 1) If you want to locate the OBD port on your Alfa Romeo Giulietta in order to use a diagnostic tool, then all you have to do is carefully read the foll…
Alfa Romeo Giulietta (2010-2020 / MK 1) Before starting, sit in the driver's seat of your Alfa Romeo Giulietta. Insert and turn the key in the ignition. Next, press and hold the accelerator…

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos