Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Giulietta
    4. : How to replace the front door panel of the Alfa Romeo Giulietta

Alfa Romeo Giulietta - Video tutorial

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Door panel
Operation: How to replace the front door panel of the Alfa Romeo Giulietta

Open the door in question and lift with a plastic lever the triangle respectively in the position of the external rearview mirror, now always with the plastic lever remove the armrest cover in a delicate and gradual way, in this way you have access to the screws to remove from the armrest, now proceed to remove the screws that are located around the door panel to be able to remove the screws that are hidden behind the handle. Now you will have to pull the panel to be able to extract it completely, disconnect the plugs on the back and that's it!


Posted on 25 September 2023 by ScegliAuto



Alfa Romeo Giulietta door panel removal guide
Alfa Romeo Giulietta (2010-2020 / MK 1) In this short and simple guide we will see the steps that will allow us to disassemble and replace the front door panel of the Alfa Romeo Giulietta.
How to remove the door panel on the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In this short and simple guide we will understand what are the steps to remove the front door panel on the Alfa Romeo Giulietta first series. First w
How to replace the internal handle of the Alfa Romeo Giulietta.
Alfa Romeo Giulietta (2010-2020 / MK 1) In today's video, we will see how to dismantle the door panel of the Alfa Romeo Giulietta. This operation may be useful if you need to replace the el

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos