Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the tailgate handle of the Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Handle

Video tutorial

Today we will explain how to replace the trunk handle of the Alfa Romeo Giulietta. To replace the handle, we need to open the trunk and remove the tailgate panel.

To do this, we need to unscrew the two screws on the sides using a Phillips screwdriver. After removing the panel, we use a 10mm socket wrench to unscrew the two screws inside the handle.

Then we push outward the button to remove it. Clean the housing well and replace the outer and inner gasket before installing the new button. Screw in the two screws and push the button inward.

Mount the tailgate panel and close the trunk. Test the button immediately by opening the trunk of our Giulietta from the outside.


Posted on 2 January 2025 by ScegliAuto


Related tutorials

How to Repair the Stuck Boot of the Alfa Romeo Giulietta
How to Repair the Stuck Boot of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In this guide, you will see the main steps to reopen the boot of the Alfa Romeo Giulietta. First, open the boot and start removing the plastic panel …
How to Replace the Internal Handle on an Alfa Romeo Giulietta?
How to Replace the Internal Handle on an Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) To replace the internal handle on an Alfa Romeo Giulietta, remove the cap located in the handle's housing and loosen the bolt beneath the cap. Next, …
How to Replace the External Handle on an Alfa Romeo Giulietta?
How to Replace the External Handle on an Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) To replace the external handle on an Alfa Romeo Giulietta, open the door to detach the protective cover located on the side near the handle: once the…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos