Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Aprilia
  4. : Scarabeo 50

How to Replace the Transmission on an Aprilia Scarabeo 50

Model: Aprilia Scarabeo 50
Part: Drivetrain

Video tutorial

To replace the transmission on an Aprilia Scarabeo 50, loosen the screws securing the side cover panel near the rear wheel. Once these screws are loosened, locate the underlying transmission, which must be removed by loosening the screws of the variator and the clutch, also removing the belt around them.

At this point, insert the new parts, reposition the belt around them, and cover everything with the corresponding casing.


Updated on 27 October 2026 by ScegliAuto


Related tutorials

Scarabeo 50 In this short and simple guide, you will learn how to disassemble and replace the headlight bulb on the Aprilia Scarabeo 50 scooter, following the in…

How to Replace the Suspension Spring on a Husqvarna FC 450

Today, we will see the instructions that will allow you to dismantle and replace the suspension spring of the Husqvarna FC 450 enduro bike. First, position the bike on a stand and start disconnecting the rear swingarm from the suspension by unscrewing the lower pin and disconnecting the linkage; this will allow you to work on the suspension by unscrewing the collar to remove the spring, as shown in the video. At this point, install the new suspension spring, compatible with the original; reassemble the suspension and rear swingarm, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos