|
Do it yourself
| |||
| ||||
Model: Aprilia Tuono
Today's main steps will show us how to disassemble and replace the low beam bulb of the front headlight of the Aprilia Tuono motorcycle. First, we put the motorcycle on the stand and start by removing the plastic protective cap of the bulb; then we disconnect the electrical connector to remove the low beam bulb, as shown in the video. At this point, we install the new low beam bulb, of the correct type and with the same attachment; we connect it and check the functioning of the light, finally fixing the outer plastic cap!
Posted on 30 October 2024 by ScegliAuto
Video tutorial
Related tutorials
Tuono
In order to replace the front brake pads of the Aprilia Tuono, you must loosen the screws that secure the front brake caliper to its housing, so that…
Tuono
In this tutorial, you will learn how to change the engine oil in an Aprilia Tuono, a very simple and quick task to perform every 12 months. First, wa…
Tuono
To remove the fuel tank from an Aprilia Tuono, first remove the seat completely to access the screws securing the tank at the rear. Once these screws…
|
How to Change the Engine Oil on a Beta RR 125?
To change the engine oil on a Beta RR 125, loosen the drain plug located at the bottom centre of the bike. Once removed, collect all the used oil in a suitably positioned container. After the oil has completely drained, remove the oil filter next to the drain plug to replace it with a new part. Now, refill by adding the necessary amount of oil through the hole on the right side of the engine casing. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
