Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Aprilia
    3. : Etv 1000 Caponord

Replace the Exhausts on an Aprilia ETV 1000 Caponord

Model: Aprilia Etv 1000 Caponord
Part: Exhaust muffler

Video tutorial

In this video, we will see how to remove and replace the exhaust terminals on an Aprilia ETV 1000 Caponord, following the instructions below. First, remove the seat of the motorcycle; then unscrew the fixing screws of the fairings, removing the bolts of the brackets for the silencer of the exhausts.

At this point, if necessary, remove the frames of the side bags or panniers; once the springs are disconnected, remove the exhaust terminals and replace them with new ones. Install the new exhaust terminals, securing them properly to the brackets and the collector!


Updated on 16 April 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Aprilia Caponord 1000
How to Reset the Service Light on the Aprilia Caponord 1000
Caponord If you own an Aprilia Caponord 1000 and want to learn how to correctly and manually reset the service light, follow these steps. First, insert the ke…
How to Change the Engine Oil and Oil Filter on an Aprilia Caponord 1000
Caponord This guide will show you the procedure to replace the engine oil and oil filter on an Aprilia Caponord 1000 in simple and quick steps. First, place y…
How to Replace the Headlight Bulb on the Aprilia Caponord
How to Replace the Headlight Bulb on the Aprilia Caponord
Caponord To replace the headlight bulb on the Aprilia Caponord, locate the protection panel on the inner part of the headlight assembly, which is immediately …

How to Replace the Suspension Spring on a Husqvarna FC 450

Today, we will see the instructions that will allow you to dismantle and replace the suspension spring of the Husqvarna FC 450 enduro bike. First, position the bike on a stand and start disconnecting the rear swingarm from the suspension by unscrewing the lower pin and disconnecting the linkage; this will allow you to work on the suspension by unscrewing the collar to remove the spring, as shown in the video. At this point, install the new suspension spring, compatible with the original; reassemble the suspension and rear swingarm, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos