Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Aprilia
    3. :
  3. Sr 50
    4. : How to top up the engine oil of the Aprilia SR 50

Model: Aprilia Sr 50
Part: Engine oil
How to top up the engine oil of the Aprilia SR 50

The guide shows how to top up the engine oil on the Aprilia SR 50 two-stroke. The first operation to be performed is to unscrew the two screws on the handlebar column. Now it is possible to remove the plastic panel on the front, uncovering the tank cap; in this operation, it is advisable to pay attention to any dirt deposits on the plastic panel. The oil top-up must be done with the same type of oil already present and of the same type defined in the user manual. Pay attention to the reassembly of the panel, especially regarding the fixing clips of the shell. At this point, it is possible to screw back the two screws fixing the front plate. The operation is completed.


Posted on 8 November 2023 by ScegliAuto



How to top up the oil in the Aprilia SR 50 R scooter?
Sr 50 In this tutorial we can see how to top up the oil in the Aprilia SR 50 R scooter, an extremely simple and fast operation, to be carried out periodica
How to replace the gearbox oil on Aprilia SR 50.
Sr 50 In this brief guide, we will discover the main instructions that will allow us to replace the transmission oil of the Aprilia SR 50 scooter. First, w
Transmission oil replacement on Sr 50 Aprilia
Sr 50 Unscrew the dipstick located near the variator and which acts as a transmission oil indicator with an Allen key. Put a container under this area, to

Replace the front brake pads of the Bmw F800 GS

Let's see in this video how to replace the front brake pads of the Bmw F800 GS motorcycle, in simple and quick steps. First of all we put the central stand to our bike and we start by unscrewing and removing the pins of the front brake caliper, removing the central stop; then we remove the caliper and take out the old pads, as shown in the video. At this point we are going to clean the dirt inside the caliper and then insert the new brake pads; do the same for the rear brake pads, following the video to the end!

Watch the video!


by ScegliAuto

More videos