Do it yourself
Frequently asked questions about cars and motorcycles
To remove the carburettor from a Piaggio Vespa ET4 125, open the under-seat compartment to loosen the screws securing the internal cover of the drawer. Once this is released, you can pull it out from its housing and access the underlying components. Here, you will find the carburettor, which must be freed from its seat by loosening the fixing screws and disconnecting various hoses and connectors. This will allow you to insert the new replacement part and reassemble all the components removed earlier.

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Vespa Et4 In this tutorial, you will see how to change the oil in a Piaggio Vespa ET4 125 scooter. For this operation, you will need a set of screwdrivers, pli…
Vespa Et4 Today's instructions will guide you through removing and replacing the spark plug on the Piaggio Vespa ET4 125 scooter in simple steps. First, place …
Vespa Et4 To change the engine oil of the Piaggio Vespa ET4, loosen the bolt securing the oil drain plug located at the bottom centre of the scooter. Once the …

Replacing the Rear Light on a Harley Davidson Street Glide

In today's tutorial video, we will see how to remove and replace the rear light on a Harley Davidson Street Glide in simple and quick steps. First, place your bike on a stand and move to the rear; then use a socket and spanner to unscrew and remove the nuts found inside the wheel arch, at the height of the rear light, as shown in the video. At this point, disconnect the electrical connector to remove and replace the light with the new one; then reassemble everything, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos