|
Do it yourself
| |||
| ||||
|
Model: Piaggio Vespa Et4
To replace the clock battery on a Piaggio Vespa ET4, loosen the screws that secure the instrument panel to its housing: these will be visible after removing the trim around it. Then, disconnect the connectors at the back and remove the battery from its housing; the new one can then be inserted into the corresponding slot, reconnecting the connectors. Once the panel is connected, refit it to ensure everything works correctly.
Updated on 20 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Vespa Et4
Today's guide will show us how to disassemble and replace the starter motor of the Piaggio Vespa ET4 150 scooter, in simple steps. First, we put the …
Vespa Et4
To change the engine oil of the Piaggio Vespa ET4, loosen the bolt securing the oil drain plug located at the bottom centre of the scooter. Once the …
Vespa Et4
In this guide, we will provide instructions for removing and replacing the fork bearings on the front fork of a Piaggio Vespa ET4. First, place the s…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.046
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |