Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the headlight bulb in the Piaggio Vespa ET4 scooter, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then remove both rearview mirrors, unscrew all the screws indicated and separate the front fairing from the handlebar. Next, disconnect the power connector, grip the bulb holder and extract it from the housing by rotating it counterclockwise. At this point, all that remains is to remove the old bulb, insert the replacement and reassemble everything following the reverse procedure.

Posted on 8 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Piaggio Vespa ET4 Scooter
How to Change the Engine Oil on a Piaggio Vespa ET4 Scooter
Vespa Et4 In this tutorial, you will learn how to change the engine oil on a Piaggio Vespa ET4 scooter, a simple and quick operation to perform every 12 months…
How to Change the Oil in a Piaggio Vespa ET4 125 Scooter
How to Change the Oil in a Piaggio Vespa ET4 125 Scooter
Vespa Et4 In this tutorial, you will see how to change the oil in a Piaggio Vespa ET4 125 scooter. For this operation, you will need a set of screwdrivers, pli…
How to Replace the Front Bulb on a Vespa ET4
How to Replace the Front Bulb on a Vespa ET4
Vespa Et4 Today, let's see how to replace the front bulb on a Vespa ET4. It is recommended to work with a cold scooter. Unscrew the screws located at the botto…

How to Replace the Headlight Bulbs on the KTM RC 200?

As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not inserted for safety. Then, approach the headlight in question, locate the bulb holder, and turn it slightly counter-clockwise. Once done, disconnect the power connector, attach the new bulb, and reassemble everything. Avoid touching the glass of the replacement bulb directly with your bare hands, as any residues could cause it to overheat.

Watch the video!


by ScegliAuto

More videos