Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, let's see how to replace the front bulb on a Vespa ET4. It is recommended to work with a cold scooter. Unscrew the screws located at the bottom of the handlebar. Remove both mirrors. Detach the front part of the shield from the central part. You will now see the headlamp bulb. Disconnect the power connector and remove the burnt bulb. The type of bulb is H4. Once done, proceed to reassemble the parts as they were originally. With the screw at the bottom, you can adjust the height of the beam according to your needs.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb in the Piaggio Vespa ET4 scooter?
How to replace the headlight bulb in the Piaggio Vespa ET4 scooter?
Vespa Et4 In this tutorial we can see how to replace the headlight bulb in the Piaggio Vespa ET4 scooter, an extremely simple and quick operation. First of all…
How to Replace the Fork Bearings on a Piaggio Vespa ET4
How to Replace the Fork Bearings on a Piaggio Vespa ET4
Vespa Et4 In this guide, we will provide instructions for removing and replacing the fork bearings on the front fork of a Piaggio Vespa ET4. First, place the s…
How to replace the spark plug on a Piaggio Vespa ET4
How to replace the spark plug on a Piaggio Vespa ET4
Vespa Et4 To replace the spark plug on the Vespa ET4 125, first open the seat and remove the helmet compartment under the seat to access the engine. Locate the…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos