|
Do it yourself
| |||
| ||||
|
Model: Piaggio Vespa Et4
In this guide, we will provide instructions for removing and replacing the fork bearings on the front fork of a Piaggio Vespa ET4. First, place the scooter on its centre stand and begin by removing the handlebars and instrument panel; unscrew the upper fork bolts, removing all steering components first. At this point, slide out the fork along with the wheel and front mudguard, then replace the steering bearings; reinstall the front fork by applying the reverse procedure!
Posted on 1 March 2026 by ScegliAuto
Video tutorial
Related tutorials
Vespa Et4
You can replace the front brake pads on the Piaggio Vespa ET4 by loosening the nuts that secure the front wheel to the corresponding hub: you will th…
Vespa Et4
To replace the clock battery on a Piaggio Vespa ET4, loosen the screws that secure the instrument panel to its housing: these will be visible after r…
Vespa Et4
In this tutorial, you will learn how to change the engine oil on a Piaggio Vespa ET4 scooter, a simple and quick operation to perform every 12 months…
|
How to Replace the Headlight Bulbs on the KTM RC 200?
As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not inserted for safety. Then, approach the headlight in question, locate the bulb holder, and turn it slightly counter-clockwise. Once done, disconnect the power connector, attach the new bulb, and reassemble everything. Avoid touching the glass of the replacement bulb directly with your bare hands, as any residues could cause it to overheat. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
