Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Piaggio Vespa ET4 Scooter

Model: Piaggio Vespa Et4
Part: Engine oil

Video tutorial

In this tutorial, you will learn how to change the engine oil on a Piaggio Vespa ET4 scooter, a simple and quick operation to perform every 12 months. First, ensure the engine is cool enough, then position a container under the scooter, locate the drain bolt, and unscrew it. Allow all the oil in the system to drain out, open the filter housing cap, and proceed with its replacement.

Reassemble everything and pour in the required amount of oil through the designated hole.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

How to Change the Oil in a Piaggio Vespa ET4 125 Scooter
How to Change the Oil in a Piaggio Vespa ET4 125 Scooter
Vespa Et4 In this tutorial, you will see how to change the oil in a Piaggio Vespa ET4 125 scooter. For this operation, you will need a set of screwdrivers, pli…
How to replace the headlight bulb in the Piaggio Vespa ET4 scooter?
How to replace the headlight bulb in the Piaggio Vespa ET4 scooter?
Vespa Et4 In this tutorial we can see how to replace the headlight bulb in the Piaggio Vespa ET4 scooter, an extremely simple and quick operation. First of all…
How to replace the spark plug of the Piaggio Vespa 150 ET4
How to replace the spark plug of the Piaggio Vespa 150 ET4
Vespa Et4 The following steps will show us how to disassemble and replace the spark plug of the Piaggio Vespa 150 ET4 scooter engine. First of all, we put the …

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos