Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the air filter of the Aprilia Scarabeo 400, you need to loosen the screws that secure the cover containing the air filter, located on the left side of the bike near the rear wheel. Once the screws have been removed, you can take off the corresponding cover to extract the air filter inside. Now, you can insert the new replacement part, properly closing the cover. After installation, start the bike to check that everything is functioning correctly.

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Oil Filter on an Aprilia Scarabeo 400 Scooter?
How to Replace the Oil Filter on an Aprilia Scarabeo 400 Scooter?
Scarabeo 400 In this tutorial, you will see how to replace the oil filter on the Aprilia Scarabeo 400 scooter, a very simple operation that must be done alongside…
How to Replace the Battery of the Aprilia Scarabeo 400?
How to Replace the Battery of the Aprilia Scarabeo 400?
Scarabeo 400 To replace the battery of the Aprilia Scarabeo 400, open the under-seat compartment to access the plastic cover at its base: beneath this cover, you …
How to Replace the Transmission of the Aprilia Scarabeo 400?
How to Replace the Transmission of the Aprilia Scarabeo 400?
Scarabeo 400 To replace the transmission of the Aprilia Scarabeo 400, loosen the screws securing the cover on the left side of the bike, near the rear wheel. Once…

How to replace the engine oil in the Ducati Monster S2R 1000?

In this tutorial we can see how to replace the motor oil in the Ducati Monster S2R 1000, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then place a container underneath it, locate the drain plug and unscrew it using a hex key. Next, unscrew the cap of the secondary filter, remove it and clean it from any dirt residue. At this point, all that remains is to unscrew the main filter, tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos