Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the rear bulb on the Scarabeo, first unscrew the two screws on the glass of the light unit. Remove the reflective plastic to access the bulb. In this case, only the position bulb was burnt out, while the stop bulb was fine. Remove it and replace it with a new one. Test it by turning on the scooter's ignition to check if it is installed correctly. Remember not to touch the bulb with bare hands. If everything is fine, reassemble the reflective plastic and the glass of the light unit. The job is complete.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle the Carburettor of the Aprilia Scarabeo 150
How to Dismantle the Carburettor of the Aprilia Scarabeo 150
Scarabeo 150 Today's guide will illustrate the main steps for dismantling and replacing the carburettor on the Aprilia Scarabeo 150 scooter. First, place your sco…
How to Replace the Headlamp Bulb on an Aprilia Scarabeo
How to Replace the Headlamp Bulb on an Aprilia Scarabeo
Scarabeo 150 To replace the headlamp bulb on the Aprilia Scarabeo, loosen the screws located at the top and bottom of the front fairing. Next, remove the screws f…
How to Change the Engine Oil on an Aprilia Scarabeo 150
How to Change the Engine Oil on an Aprilia Scarabeo 150
Scarabeo 150 In today's video, we will see how to change the engine oil while performing the regular maintenance service on an Aprilia Scarabeo 150 scooter. First…

How to Replace the Front Tyre on the Sym Wide Evo 125

Below are the main steps that will allow you to remove and replace the front wheel and tyre of the Sym Wide Evo 125 scooter. First, place your scooter on the centre stand and start unscrewing the fixing screws of the front brake caliper to remove it; then unscrew the nuts of the front wheel, as shown in the video. At this point, remove the tyre from the rim, replacing it with the new one; then install the front wheel and reattach the brake caliper, applying the reverse procedure of disassembly!

Watch the video!


by ScegliAuto

More videos