Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlamp Bulb on an Aprilia Scarabeo

Model: Aprilia Scarabeo 150
Part: Light bulb

Video tutorial

To replace the headlamp bulb on the Aprilia Scarabeo, loosen the screws located at the top and bottom of the front fairing. Next, remove the screws found inside the fairing, near the grips.

This will allow you to slide off the fairing and disconnect the connector from the bulb. You can now remove the bulb from its housing by unscrewing its fixing screws, and once removed, it can be replaced.

The new bulb can then be connected to the connector, and the front fairing can be reattached using the appropriate screws.


Updated on 19 May 2026 by ScegliAuto


Related tutorials

How to Change the Rear Light Bulbs on an Aprilia Scarabeo 150?
How to Change the Rear Light Bulbs on an Aprilia Scarabeo 150?
Scarabeo 150 To replace the rear bulb on the Scarabeo, first unscrew the two screws on the glass of the light unit. Remove the reflective plastic to access the bu…
How to Dismantle the Carburettor of the Aprilia Scarabeo 150
How to Dismantle the Carburettor of the Aprilia Scarabeo 150
Scarabeo 150 Today's guide will illustrate the main steps for dismantling and replacing the carburettor on the Aprilia Scarabeo 150 scooter. First, place your sco…
How to Change the Engine Oil on an Aprilia Scarabeo 150
How to Change the Engine Oil on an Aprilia Scarabeo 150
Scarabeo 150 In today's video, we will see how to change the engine oil while performing the regular maintenance service on an Aprilia Scarabeo 150 scooter. First…

How to Replace the Handlebars on the Ducati Scrambler

This guide provides instructions on how to remove and replace the handlebars on the Ducati Scrambler motorcycle, following the steps outlined below. First, place the bike on its centre stand and begin removing the grips by unscrewing the screws and taking off the bar ends; then unscrew the handlebar mounting screws to remove the handlebars, as shown in the video. At this point, correctly install the new handlebars to ensure they are centred; then reassemble and secure the grips and side bar ends, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos