Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today's guide will illustrate the main steps for dismantling and replacing the carburettor on the Aprilia Scarabeo 150 scooter. First, place your scooter on the centre stand and begin by removing the plastic cover located under the seat. Then, disconnect the fuel hose from the carburettor and the throttle cable, as shown in the video. At this point, loosen the screw of the air filter box clamp and that of the intake manifold; then remove the carburettor, performing cleaning or replacement as necessary!

Updated on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on an Aprilia Scarabeo 150
How to Change the Engine Oil on an Aprilia Scarabeo 150
Scarabeo 150 In today's video, we will see how to change the engine oil while performing the regular maintenance service on an Aprilia Scarabeo 150 scooter. First…
How to Change the Rear Light Bulbs on an Aprilia Scarabeo 150?
How to Change the Rear Light Bulbs on an Aprilia Scarabeo 150?
Scarabeo 150 To replace the rear bulb on the Scarabeo, first unscrew the two screws on the glass of the light unit. Remove the reflective plastic to access the bu…
How to Replace the Headlamp Bulb on an Aprilia Scarabeo
How to Replace the Headlamp Bulb on an Aprilia Scarabeo
Scarabeo 150 To replace the headlamp bulb on the Aprilia Scarabeo, loosen the screws located at the top and bottom of the front fairing. Next, remove the screws f…

How to replace the engine oil in the Ducati Monster S2R 1000?

In this tutorial we can see how to replace the motor oil in the Ducati Monster S2R 1000, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then place a container underneath it, locate the drain plug and unscrew it using a hex key. Next, unscrew the cap of the secondary filter, remove it and clean it from any dirt residue. At this point, all that remains is to unscrew the main filter, tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos