Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the rear headlight bulb of the Kymco ZX 50, you need to loosen the screws that secure the optical group to its housing: this can be found immediately below the seat. Once the screws holding the optical group are loosened, it will be possible to remove the headlight from its seat and disconnect the connector inside. At this point, the bulb can be removed from inside the headlight and replaced with a new spare part; the optical group will now be fixed to ensure that everything works correctly.

Posted on 19 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Turn Signal Bulb on a Mercedes-Benz Class A
How to Replace the Rear Turn Signal Bulb on a Mercedes-Benz Class A
Mercedes Classe A (2004-2012 / W169) To replace the bulb for the rear turn signal on the vehicle's rear lamp, follow these steps: open the trunk of the car, assuming you need to replace …
How to Replace the Rear Indicator Bulb on a Kymco Agility 125?
How to Replace the Rear Indicator Bulb on a Kymco Agility 125?
Agility 125 To replace the rear indicator bulb on the Kymco Agility, open the under-seat compartment to access all the screws securing the rear fairing. This fai…
How do you replace the front turn signal bulb on the Kymco Like 125?
How do you replace the front turn signal bulb on the Kymco Like 125?
Like 125 In order to replace the front turn signal light bulb of the Kymco Like 125, you need to reach inside the wheel well of the front wheel: here you will…

How to Replace the Front Headlight Bulb on the Suzuki GS 500?

In this tutorial, you will see how to replace the front headlight bulb on the Suzuki GS 500, a very simple and quick operation. Before proceeding, ensure that the key is not inserted to operate safely. Start by positioning yourself in front of the headlight in question, then locate the two screws at the bottom and unscrew them with a cross-head screwdriver. Next, separate the headlamp from the bracket, disconnect the power connector, and remove the rubber cap. At this point, simply unclip the metal clip, extract the old bulb, and fit the replacement.

Watch the video!


by ScegliAuto

More videos