Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front headlight bulb of the KTM Duke 200?

Model: Ktm Duke 200
Part: Headlight bulb

Video tutorial

The headlight bulb on the KTM Duke 200 can be replaced by loosening the screws that secure the headlight unit to its housing on the front of the motorcycle: once all these screws have been loosened, it will be possible to remove the headlight unit from its housing and thus remove the protective cover inside.

At this point, it will be possible to remove the bulb from inside the headlight, replacing it with a new spare part.

After the replacement, it will be possible to insert the headlight into its housing, securing it with the appropriate screws.


Posted on 19 December 2024 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a KTM Duke 200
How to Replace the Headlight Bulb on a KTM Duke 200
Duke 200 In this guide, find the main instructions to remove and replace the dipped beam bulb of the front headlight on a KTM Duke 200. First, place the motor…
How to Replace the Headlight Bulb on the KTM Duke 200
How to Replace the Headlight Bulb on the KTM Duke 200
Duke 200 To replace the headlight bulb on the KTM Duke 200, you need to loosen the screws that secure the headlight unit to its housing at the front of the bi…
Replacing the Front Headlamp Bulb on a KTM Duke 200
Replacing the Front Headlamp Bulb on a KTM Duke 200
Duke 200 In today's video, you will learn how to remove and replace the front headlamp bulb on a KTM Duke 200. First, remove the side screws located near the …

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos