Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front brake pads on the Kawasaki Ninja 400?

Model: Kawasaki Ninja 400
Part: Brake pads

Video tutorial

In this tutorial we can see how to replace the front brake pads on the Kawasaki Ninja 400, a very simple and quick operation. First of all, position yourself in front of the brake in question, then disconnect the ABS sensor connector and, using a 12mm socket wrench, unscrew the two caliper mounting bolts.

Then separate the caliper from the fork, unscrew the pin with a hex key and remove it. At this point we can remove the old pads, clean the dirt present, insert the replacements and reassemble everything.


Posted on 19 December 2024 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Kawasaki Ninja 400?
How to Replace the Front Brake Pads on a Kawasaki Ninja 400?
Ninja 400 To replace the front brake pads on a Kawasaki Ninja 400, loosen the screws that secure the brake caliper to the corresponding disc. Once these screws…
How do you replace the brake pads of the Kawasaki Ninja 400?
How do you replace the brake pads of the Kawasaki Ninja 400?
Ninja 400 It will be possible to replace the brake pads of the Kawasaki Ninja 400 by performing the same procedure for both the front and rear wheels: you will…
How do you replace the rear brake pads of the Kawasaki Ninja 400?
How do you replace the rear brake pads of the Kawasaki Ninja 400?
Ninja 400 To replace the rear brake pads of the Kawasaki Ninja 400, you will need to loosen the screws that secure the brake caliper corresponding to the disc:…

How to replace the engine oil and oil filter on the Gasgas 700

Today, we will go through the procedure for replacing the engine oil and oil filter while performing the routine maintenance service on the Gasgas 700 motorcycle. First, place it on the stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Unscrew the screws of the oil filter cover to remove the cartridge and replace it with a new one, as shown in the video. Next, unscrew the filler cap and pour in the new engine oil, following the specifications in the owner's manual.

Watch the video!


by ScegliAuto

More videos