Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Aprilia Caponord
Part: Clutch

This guide provides instructions on how to remove and replace the clutch discs on the Aprilia Caponord in simple steps. First, undo the oil drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes; then, remove the screws from the clutch cover on the right, as shown in the video. Next, unscrew the screws from the clutch pack, removing all the discs; then install the new clutch discs, alternating the cork discs with the metal ones.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front headlight bulb of the Aprilia Caponord?
How do you replace the front headlight bulb of the Aprilia Caponord?
Caponord In order to replace the headlight bulb of the Aprilia Caponord, you need to locate the protective panel inside the optical group, which is located im…
How to Change the Engine Oil on an Aprilia Caponord?
How to Change the Engine Oil on an Aprilia Caponord?
Caponord You can change the engine oil on an Aprilia Caponord by unscrewing the drain plug located at the central lower part of the vehicle: once the plug is …
How do you replace the air filter of the Aprilia Caponord?
How do you replace the air filter of the Aprilia Caponord?
Caponord In order to replace the air filter of the Aprilia Caponord, you need to loosen the screws that secure the motorcycle seat to its housing, so that it …

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos