Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. Audi Vari
    4. : Timing belt

Audi Audi Various - Timing belt

Timing Belt Audi Audi Various ( / )

Audi Audi Various
The problem caused by oil leakage in Audi A3 and Volkswagen Golf and Passat 1.6 and 2.0 TDI.
In this video we see the problem that can be caused by the loss of oil coming from the crankshaft oil seal on Audi A3 and Volkswagen Golf and Passat; the oil …Read all…
Posted on 16 September 2024 by ScegliAuto
Audi Audi Various
Replacement of the timing chain of the Audi 2.5 TDI V6 AKE engine
In this video we can see how to replace the timing belt of the Audi 2.5 TDI V6 AKE engine, for which two toothed belts are needed; to lock the timing we have …Read all…
Posted on 27 April 2024 by ScegliAuto
Audi Audi Various
How to replace the timing belt on the Audi 2.0 TDi engine?
To replace the timing belt on the Audi 2.0 TDi engine, loosen the screws securing the front bumper of the car so that it can be removed to access the front of …Read all…
Posted on 15 August 2026 by ScegliAuto
Airbag (2) Car stereo (3) Air vents (1) Transmission (2) Body (1) Control unit (1) Key (18) Timing belt (3) Air conditioner (1) Onboard computer (9) Checks and maintenance (14) Headlight (4) Fuel injectors (1) Headlight bulb (1) License plate light (1) Transmission fluid (1) Brake pads (2) Shift knob (1) Pump (1) Instrument cluster (2) Wheel (1) Axle shaft (1) Side mirror (1) Rearview mirror (1) Warning light – error code (10) (4) Tire pressure warning light (2) Service warning light (2) Manufacturer emblem (1) Fuel cap (2) Drivetrain (1) Side window (1) Steering wheel (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos