Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service of the Audi Q2

Model: Audi Q2 MK 1 - Years 2016-2024
Part: Warning light – error code

To reset the service of the Audi Q2, the manual specifies that diagnostic equipment must be used. In reality, there is also an empirical method, which is what we show you in this video. We turn on the ignition and wait for the MMI to start; we press the "menu" button and rotate the knob upwards. We confirm with date and time; to set this function, we press the left knob and enter the vehicle setting menu. Now we find the "service and control" function and confirm. We turn the knob to "service intervals function", and go up to "oil change" select "reset" and confirm with "yes". To return to the main menu, press the "back" button several times.

Posted on 10 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service in the Audi Q2?
How to reset the service in the Audi Q2?
Audi Q2 (2016-2024 / MK 1) In this tutorial we can see how to reset the service in the Audi Q2, a very simple operation, to be performed only after completing all the scheduled…
How to reset the service light on the Audi Q2
How to reset the service light on the Audi Q2
Audi Q2 (2016-2024 / MK 1) Today we will explain how to reset the service light, related to the car service, on an Audi Q2 vehicle independently. To reset the light, we need to…
Resetting the service indicator light of the Audi Q2.
Resetting the service indicator light of the Audi Q2.
Audi Q2 (2016-2024 / MK 1) After changing the oil of the Audi Q2 engine, we need to reset the verification system that alerts us about the need for this important maintenance o…

How to Replace the Damaged Number Plate Bulb on Fiat 600

In this video, learn how to replace the damaged number plate bulb on a Fiat 600. Use a screwdriver or plastic lever to remove the number plate light unit located in the rear bumper of the car. Once the light unit is removed, extract the lamp holder with your hands, then disconnect the bulb from it. Fit the new bulb/LED (same size and voltage) into the lamp holder, then reassemble the light unit into the bodywork of the tailgate, pressing it until the clips lock automatically. Finally, test the correct operation of the previously installed bulb.

Watch the video!


by ScegliAuto

More videos