Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the third brake light bulb of the Audi A6

Model: Audi A6 MK 3, C6 - Years 2004-2012
Part:

Today we will see the instructions that will allow us to disassemble and replace the third brake light bulbs of the Audi A6. First, we open the rear trunk door and start removing the plastic cover behind the third brake light; then we push on the clips of the light to detach it and remove it from the outside, as shown in the video. At this point, we separate the light fixture from the bulbs, replacing either the bulbs or the entire third brake light; all that's left is to reassemble it on the body, properly securing the clips, and finally checking the functioning of the lights!

Posted on 21 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing and Replacing the Third Brake Light of an Audi A6
Removing and Replacing the Third Brake Light of an Audi A6
Audi A6 (2004-2012 / MK 3, C6) Let’s briefly go over the instructions that will allow you to remove and replace the third brake light and its bulbs on an Audi A6. First, open the r…
How to Remove the Third Brake Light and Its Bulbs on an Audi A6
How to Remove the Third Brake Light and Its Bulbs on an Audi A6
Audi A6 (1997-2004 / MK 2, C5) These simple steps will allow you to remove the third brake light assembly and replace its bulbs on an Audi A6. First, open the trunk of the vehicle …
How to Replace the Third Brake Light on the Audi A6 Avant
How to Replace the Third Brake Light on the Audi A6 Avant
Audi A6 (2004-2012 / MK 3, C6) On the upper edge of the rear hatch of this Audi model, the LED third brake light is located. To replace it, you should remove the plastic cover of t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos