|
Do it yourself
| |||
| ||||
How to repair the instrument panel of an Audi A3
Model: Audi A3
8V, MK 3
- Years 2012-2019
We can see in this video how to repair the instrument panel of an Audi A3 8V, which has a non-functioning LCD screen. First, we disconnect the negative pole of the battery, then we go to the instrument panel and remove the plastic gasket located on the bottom, in order to remove the entire cluster. We remove the four screws that secure the back cover, and we pry on the two clips that allow us to remove the cover from its housing. Now we remove the electrical connectors from the electronic board, turn over the dial and remove the hands from the speedometer and tachometer. We remove the attachment of the LCD screen from the board, and now we can remove the screen from its housing. In the meantime, we will have procured a new screen, for example on mr-key.com with the code 8L0920931F at a price of 55.99 euros (however, we do not have information about shipping costs). We reconnect the new screen, reassemble the mask and the hands, making sure they rotate correctly, and we reassemble the cluster in its place. We verify the functioning of the LCD screen.
Posted on 14 December 2024 by ScegliAuto
Video tutorial
Related tutorials
Audi A3
(2003-2013 /
MK 2, 8P)
In this short and simple guide, we will see how to repair the sun visor of the Audi A3, following the instructions below. First, we get into the car …
Audi A3
(2003-2013 /
MK 2, 8P)
Today, in this video tutorial, we will see the steps that will allow us to repair the door lock of the Audi A3. First of all, we open the front door …
Audi A3
(1996-2003 /
8L, MK 1)
The video uploaded here shows the correct operational procedure for disassembling the internal panel of the door of an Audi A3 8l. In this case, the …
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Replace the Cabin Fan Resistor on a BMW 3 Series
How to Replace the Cabin Fan Resistor on a BMW 3 Series. Open the door and remove the plastic cover under the dashboard on the right side. Use a trim tool to pry off the cover next to the dashboard. Get a screwdriver or a cordless drill, open the glove compartment, and unscrew the fastening screws around the perimeter with a screwdriver. Once this is done, pull out the glove compartment and disconnect the power cables. Remove the fan resistor from its housing, insert the new part into the filter holder, and reassemble all the components of the glove compartment as you disassembled them earlier. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.126
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |