Do it yourself
| ||||
|
Audi A3 - Video tutorial
Model: Audi A3
8P, MK 2
- Years 2003-2013 Today, in this video tutorial, we will see the steps that will allow us to repair the door lock of the Audi A3. First of all, we open the front door and start unscrewing the side screw of the door, located inside the hole; to do this, we use a torx key, as shown in the video. At this point, we remove the lock cylinder from the external handle; then we repair the lock or replace the cylinder if necessary (which requires replacing the key). All that's left is to reassemble everything, following the reverse procedure!
Posted on 21 October 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to program the remote control of the Citroen C3?To program the remote control of the Citroen C3 there is no need to use special instruments. To begin with, we enter the passenger compartment of our car from the driver's side and, after closing the windows and doors, you can insert the key and turn on the ignition (but not the engine!). At this point, the top button on the remote control must be pressed for at least 3 seconds. After these few seconds, we must turn off the ignition, remove the key and press the last button on the remote control for at least three seconds. We just programmed our remote! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.074
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |