Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Lock on an Audi A3 8P

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Door lock

The door lock mechanism of the Audi A3 8P is known for its electronic faults. To remove it, locate the yellow latch inside the panel. With a flathead screwdriver, gently push the yellow tab to release the black rear connector. Once released, the lock can be extracted. You can find the new lock on eBay with the code 354731606579 for £38.79, with free delivery. Before installing the new lock, ensure the connector is properly aligned. Refit the part and press the yellow latch until you hear a click to secure the connector. The procedure is straightforward but requires precision to avoid damaging the plastic components. A trick that will save you lengthy and frustrating assembly operations.

Posted on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you deactivate the passenger airbag of the Audi A3?
How do you deactivate the passenger airbag of the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) In order to deactivate the passenger airbag of the Audi A3, you need to open the glove compartment located on the side of the front passenger. Once t…
Replacing the Lock on Audi A3 8P
Replacing the Lock on Audi A3 8P
Audi A3 (2003-2013 / MK 2, 8P) Using a flat screwdriver or a small plastic lever, detach the small plastic around the lock buttons. Unscrew the now exposed screw with a Torx T20 ke…
How to Open the Fuel Filler Flap on Audi A3
How to Open the Fuel Filler Flap on Audi A3
Audi A3 (2003-2013 / MK 2, 8P) How do you open the flap on the A3? Remove the trim plastics in the boot to access the back of the flap. Open the boot lid and take off the trim plas…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos