Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Light Bulbs on Audi A3

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Interior dome light bulb

To replace the bulbs in the interior light located inside the Audi A3, first purchase the replacement bulbs, which should ideally be guaranteed and usually come with the necessary tools for replacement. Use a small plastic pry tool to remove the transparent plastic cover above the rear-view mirror. This gives you access to the two bulbs, allowing you to replace the one you need. You can also remove the plastic cover at the bottom (using the plastic lever) to access the other two bulbs, which can be replaced by turning them counter-clockwise. To replace the bulbs in the two small lights above the sun visors for the front seats, simply remove the lights themselves using a plastic lever, then access the bulb after removing the internal metal cover. Finally, to replace the bulb in the boot light, use the plastic lever to remove it from its housing. Then, use two levers to disconnect the power supply, and lastly, remove the plastic connection of the power supply to access the bulb.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Interior Lights of the Audi A3
Replacing the Interior Lights of the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Follow the steps below to remove and replace the bulbs in the interior light of the Audi A3. First, get inside the vehicle and pry off the plastic li…
How to Replace the Interior Light Bulbs on an Audi A3?
How to Replace the Interior Light Bulbs on an Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) To replace the interior light bulbs on an Audi A3, use a lever tool to detach the central ceiling light and then remove the underlying plastic cover.…
How to Replace the Interior Light Bulbs in an Audi A3
How to Replace the Interior Light Bulbs in an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) In this tutorial, you will see how to replace the interior light bulbs in an Audi A3, a very simple and quick operation. To do this, you will need a …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos