Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Headlight Bulb of an Audi A3

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
This video is currently unavailable

How to remove the headlight bulb of an Audi A3? Lift the front bonnet to access the front headlights and replace the bulbs. Remove the plastic cover at the back of the headlight: take off the plastic cover.

After removing the plastic cover, disconnect the damaged bulbs from inside the headlight. Connect the new bulbs inside the headlight.

Test the operation of the new bulbs, then secure the cover cap at the back of the headlights. Close the front bonnet after maintenance.

Install bulbs of the same size and voltage.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Front Headlights on the Audi A3
How to Remove and Replace the Front Headlights on the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) This guide provides instructions for removing and replacing the front headlights on the Audi A3, following these simple steps. First, lift the vehicl…
How to Remove the Front Headlights on an Audi A3 8P
How to Remove the Front Headlights on an Audi A3 8P
Audi A3 (2003-2013 / 8P, MK 2) In this video, we will see how to remove the front headlights on an Audi A3 8P in simple and quick steps. First, open the bonnet of your car and begi…
How to Adjust the Headlights on an Audi A3
How to Adjust the Headlights on an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Learn how to set/adjust the headlights on an Audi A3. To adjust the brightness of the headlights: enter the cabin, switch on the instrument cluster, …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos