Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Audi A3 engine mount replacement

Model: Audi A3 8P, MK 2 - Years 2003-2013
Part: Engine mount

One of the first symptoms of the failure of the engine support is an excessive oscillation of the engine itself, especially in the ignition and shutdown phase; furthermore, due to the deterioration of the rubber of the support which should act as a damper, there is also a noise during acceleration and braking; the replacement of the support is quite simple to carry out but it is necessary to lift the car on the bridge and unscrew the fixing pins of the support to be able to remove it and insert the new one; it is advisable to spray spray grease on the new support so that the rubber remains protected.

Posted on 16 July 2019 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear engine mount of the Audi A3?
How do you replace the rear engine mount of the Audi A3?
Audi A3 (2003-2013 / 8P, MK 2) In order to replace the rear engine mount of the Audi A3, the car must be lifted so that access to the components of the lower engine compartment can…
How to replace the front headlight bulb of the Audi A3
How to replace the front headlight bulb of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Today we will explain how to replace the headlight bulb of the right front headlight of an Audi A3 model 8P car. Before proceeding with the replaceme…
How to replace the battery in the Audi A3?
How to replace the battery in the Audi A3?
Audi A3 (2012-2019 / MK 3, 8V) Replacing the battery in the Audi A3 is very simple, let's see how to proceed in this tutorial. For this operation, in addition of course to a suitab…

Other guides you may be interested in

How to Replace the Thermostat on a Fiat Punto 2 Series 8v

When replacing the thermostat, it is advisable to drain the coolant system completely. The thermostat is located just above the gearbox, directly under the ignition coils. To facilitate the replacement, disconnect the intake duct hose and remove the coil pack. At this point, disconnect the connector from the thermostat and proceed to remove the corresponding fixing pins to replace it with the new one, ensuring to use a new gasket.

Watch the video!


by ScegliAuto

More videos