Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Punto
  6. : How to replace the thermostatic valve of the Fiat Punto 2 Serie 8 v

Fiat Punto - Video tutorial

Model: Fiat Punto 188, MK 2 - Years 1999-2011
Part: Thermostat
Operation: How to replace the thermostatic valve of the Fiat Punto 2 Serie 8 v

When replacing the thermostatic valve, since it is advisable to drain the refrigerant system, it is recommended to replace it completely; the valve is located immediately above the gearbox, practically under the ignition coils: to proceed easily with the replacement it is therefore suggested to disconnect the intake duct coupling and to remove the coil block; at this point disconnect the socket from the thermostatic valve and proceed with the disassembly of the relative fixing pins to be able to replace it with the new one, taking care to use a new gasket.


Posted on 5 October 2023 by ScegliAuto



Disassembly of the Fiat Punto thermostatic valve
Fiat Punto (2005-2018 / MK 3, 199, Punto EVO, Grandepunto ) In today's video tutorial we will see how to disassemble the thermostatic valve of a Fiat Punto. First we lift the car and open the vent with a 13 mm
How to change the thermostatic valve of the Fiat Punto 1400
Fiat Punto (2005-2018 / MK 3, 199, Punto EVO, Grandepunto ) The thermostatic valve has the function of activating the exchange between the hot liquid found in the engine, with the colder liquid contained insid
Fiat Punto 2nd series thermostatic valve replacement
Fiat Punto (1999-2011 / 188, MK 2) I will explain how to change the thermostatic valve of your car, first of all remove the ignition coil, in order to work better, after which remove t

Other guides that may interest you

    Frequently Asked Questions

    • Punto 2005-2018 - What is the price for the Punto 1.3 multijet thermostat? Read Answer
    • Punto 1999-2011 - What problem can the thermostat of the Fiat Punto present? Read Answer
    • Punto 1999-2011 - How much does it cost to replace the thermostatic valve on the Fiat Punto? Read Answer
    • Punto 1999-2011 - Where is the thermostatic valve of the Fiat Punto 188 located? Read Answer

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos