Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Ignition Coil on Fiat Punto 188 Fire 16V Petrol

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Ignition coil

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the ignition coil from a Fiat Punto 188 Fire 16V petrol. First, open and lift the bonnet of the car: then remove the clips from the intake hose and detach it. Next, unscrew the screws of the air filter box using a 10 mm socket, and remove the other intake hose; now focus on the coil, where you will disconnect the electrical connector and remove the four fixing screws of the coil: unscrew using a T25 torx spanner.

Now remove the coil, as shown in the video!


Updated on 10 April 2026 by ScegliAuto


Related tutorials

Replacing the Ignition Coil on a Fiat Punto
Replacing the Ignition Coil on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Replace the faulty ignition coil on a Fiat Punto. Pull the engine compartment release lever located at the bottom left of the dashboard and lift the …
Replacing the timing belt on the Fiat Punto 2 1.2 Fire
Replacing the timing belt on the Fiat Punto 2 1.2 Fire
Fiat Punto (1999-2011 / MK 2, 188) This guide outlines the main steps to remove and replace the timing belt on the second series Fiat Punto with a 1.2 Fire engine. First, lift the vehi…
A small modification to improve the performance of a Fiat Singlepoint engine.
A small modification to improve the performance of a Fiat Singlepoint engine.
Fiat Punto (1999-2011 / MK 2, 188) In this video, we see an easy, small modification for Fiat cars, but it is limited to single-point engines: such as the Uno Fire, the Panda Fire, the…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos