Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the timing belt on the Fiat Punto 2 1.2 Fire

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Timing belt

See other generations:
Video tutorial

This guide outlines the main steps to remove and replace the timing belt on the second series Fiat Punto with a 1.2 Fire engine. First, lift the vehicle and remove the front right wheel; then, take off the front wheel arch by unscrewing the screws, and remove the engine mount found on the right side of the engine bay, as shown in the video.

Next, remove the timing cover to access the timing belt; take the necessary references to remove and replace the belt, following the video to the end!


Updated on 6 May 2026 by ScegliAuto


Related tutorials

Replacing the Timing Belt on a Fiat Punto
Replacing the Timing Belt on a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Replacing the timing belt on a Fiat Punto. Lift the car on a column lift or jack (if necessary, remove the front wheel, and use a screwdriver to remo…
Replacement of the Timing Belt on the Fiat Punto 1.9 JTD
Replacement of the Timing Belt on the Fiat Punto 1.9 JTD
Fiat Punto (1999-2011 / MK 2, 188) In this guide, follow the instructions to remove and replace the timing belt on the Fiat Punto 1.9 JTD. First, lift the vehicle and remove the front …
Replacing the Timing Belt on Fiat Punto 1.2
Replacing the Timing Belt on Fiat Punto 1.2
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today, we will see the instructions that will allow us to remove and replace the timing belt on the Fiat Punto 1.2. First, open the engine bonnet of …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos