Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Timing Belt on the Fiat Punto 1.9 JTD

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Timing belt

In this guide, follow the instructions to remove and replace the timing belt on the Fiat Punto 1.9 JTD. First, lift the vehicle and remove the front right wheel; then, remove the auxiliary belt by loosening the tensioner. Next, remove the timing cover by unscrewing all the side screws; also remove the crankshaft pulley. Now, replace the timing belt, taking all necessary references; finally, reassemble everything, following the video to the end!

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Belt on a Fiat Grande Punto - Punto Evo 1.2 Petrol
Replacing the Timing Belt on a Fiat Grande Punto - Punto Evo 1.2 Petrol
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, you will see the steps to change the timing belt on a Fiat Grande Punto or Punto Evo with a 1.2 petrol engine. First, lift the vehicle…
How to Replace the Timing Belt on a Fiat Punto 1.2
Fiat Punto (1999-2011 / MK 2, 188) Before starting, raise the front of your Fiat Punto 1.2. Begin by removing the right front wheel. Next, detach and move the inner wheel arch by unscr…
How to Replace the Timing Belt on a Fiat Punto 1.4
How to Replace the Timing Belt on a Fiat Punto 1.4
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, you will see how to replace the timing belt on a Fiat Punto 1.4. First, from the driver's seat, open the engine bay. Once the bonnet i…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos