Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Ignition Coil on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Ignition coil

See other generations:
Video tutorial

Replace the faulty ignition coil on a Fiat Punto. Pull the engine compartment release lever located at the bottom left of the dashboard and lift the front bonnet, securing it. Unscrew the securing bolts of the coil with a suitable socket wrench (if present), grasp it with your hands and twist it to remove it from the cylinder head.

Disconnect the power connector of the coil. Connect the wire of the new coil and attach it to the spark plug.

Refit the plastic cover panel that was removed earlier. Start the vehicle.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

Replacing Ignition Coil on Fiat Punto 188 Fire 16V Petrol
Replacing Ignition Coil on Fiat Punto 188 Fire 16V Petrol
Fiat Punto (1999-2011 / MK 2, 188) In this video tutorial, you will learn how to remove the ignition coil from a Fiat Punto 188 Fire 16V petrol. First, open and lift the bonnet of the …
How to Replace the Spark Plugs on a Fiat Grande Punto
How to Replace the Spark Plugs on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the spark plugs on a Fiat Grande Punto, first open the bonnet to access the top of the engine block. You will find a plastic cover that ne…
How to Remove the Spark Plugs from a Fiat Punto
How to Remove the Spark Plugs from a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How to remove the spark plugs from a Fiat Punto? Open the front bonnet and proceed with the spark plug removal. Lift the bonnet and secure it, then r…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos