Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : Remove the Fiat Punto spark plugs

Fiat Punto - Video tutorial

Model: Fiat Punto 199, Punto EVO, Grandepunto , MK 3 - Years 2005-2018
Part: Spark plugs
Operation: Remove the Fiat Punto spark plugs

How to remove the spark plugs of a Fiat Punto? We open the front hood and see the disassembly of the spark plugs. We lift the front hood, put it in safety, remove the soundproofing panel that covers the head of the engine. We pull the coil, unscrew all the spark plugs with our socket wrench (we check the damaged ones), finally pull them out of the cylinder head. We fit the new spark plugs to replace the damaged spark plugs, tighten them well, secure the power supply coils, mount the previously disassembled panel. At the end of the assembly of the spark plugs, we light and check the operation of the Punto.


Posted on 19 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Punto 2005-2018 - What causes the cold start problem of the Fiat Grande Punto 1.2 8V? Read Answer
    • Punto 1999-2011 - How much does it cost to replace the spark plugs on the Fiat Punto 1.3 multijet? Read Answer
    • Punto 1999-2011 - How much do the spark plugs on the 2001 Fiat Punto 1.2 ELX cost? Read Answer
    • Punto 1999-2011 - How much do the Fiat Punto spark plugs cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos