Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Ignition Coils on the Fiat 124?

Model: Fiat 124 MK 2 - Years: 2016, 2017, 2018, 2019
Part: Ignition coil

See other generations:
Video tutorial

To replace the ignition coils on the Fiat 124, open the bonnet to locate the components at the top of the engine block. Once these components are identified, disconnect the cables connected to the coils and proceed to loosen the screws that secure them in their housing.

Once the old coils are removed from their housing, you can connect the new replacement parts, inserting them into their slots and ensuring everything functions correctly.


Updated on 2 July 2026 by ScegliAuto


Related tutorials

How to Remove the Ignition Cylinder of the Fiat 124 Spider
How to Remove the Ignition Cylinder of the Fiat 124 Spider
Fiat 124 (1966-1985 / MK 1) Today's main instructions will show you the procedure for removing and replacing the ignition cylinder of the Fiat 124 Spider. First, get into the ca…
Where to Find the OBD2 Port on the Fiat 124 Spider
Where to Find the OBD2 Port on the Fiat 124 Spider
Fiat 124 (2016-2019 / MK 2) If you own a Fiat 124 Spider Mk2 and want to find the OBD2 port, follow this guide. First, reach the driver's seat inside the vehicle, then turn off …
How to Reset the Oil Light on a Fiat 124 Spider?
How to Reset the Oil Light on a Fiat 124 Spider?
Fiat 124 (2016-2019 / MK 2) To reset the oil light on the Fiat 124 Spider, turn on the ignition without starting the engine. Once the ignition is on, press the brake pedal and s…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos