Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the ignition cylinder of the Fiat 124 Spider

Model: Fiat 124 MK 1 - Years 1966-1985

Today's main instructions will show us the process of disassembling and replacing the ignition cylinder of the Fiat 124 Spider. First, we climb aboard the cabin and begin to unscrew the bolts of the ignition cylinder bracket; it will be necessary to disconnect the wiring to later remove the entire ignition cylinder, as shown in the video. At this point, we install the new ignition cylinder and the steering lock, checking its operation; we properly secure everything under the steering wheel, following the video tutorial until the end!

Posted on 15 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light on a Fiat 124 Spider
How to Reset the Maintenance Light on a Fiat 124 Spider
Fiat 124 (2016-2019 / MK 2) To complete the manual reset procedure for the maintenance light on your Fiat 124 Spider, simply follow the steps described below. First, get into th…
Where is the OBD2 port located in the Fiat 124 Spider?
Where is the OBD2 port located in the Fiat 124 Spider?
Fiat 124 (2016-2019 / MK 2) If you own a Fiat 124 Spider Mk2 and want to find out where the OBD2 port is located, you just need to read the following guide and follow the descri…
How to reset the service light on a Fiat Spider 124.
How to reset the service light on a Fiat Spider 124.
Fiat 124 (2016-2019 / MK 2) To reset the service light of a Fiat Spider 124 car, you will need to follow the steps shown in the selected video. Get inside the vehicle, press the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos