Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD2 port located in the Fiat 124 Spider?

Model: Fiat 124 MK 2 - Years 2016-2019
Part: Dashboard

If you own a Fiat 124 Spider Mk2 and want to find out where the OBD2 port is located, you just need to read the following guide and follow the described procedure. First, you need to reach the driver's seat inside the vehicle, then turn off the ignition if it is still on and shift your attention to the bottom of the dashboard. At this point, locate the OBD2 port you were looking for and the procedure is successfully completed. Finally, you can connect a diagnostic tool to the OBD2 port as long as it is compatible with your Fiat 124 Spider.

Posted on 21 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light on a Fiat 124 Spider
How to Reset the Maintenance Light on a Fiat 124 Spider
Fiat 124 (2016-2019 / MK 2) To complete the manual reset procedure for the maintenance light on your Fiat 124 Spider, simply follow the steps described below. First, get into th…
How are the fuses distributed in the Fiat 124 Spider?
How are the fuses distributed in the Fiat 124 Spider?
Fiat 124 (2016-2019 / MK 2) The Fiat 124 Spider has two fuse boxes located inside, which are very important for the operation of everything related to the electrical and electro…
How to reset the Service light on the Fiat 124 Spider?
How to reset the Service light on the Fiat 124 Spider?
Fiat 124 (2016-2019 / MK 2) To reset the Service light on the Fiat 124 Spider, turn on the instrument panel and navigate through the menu that appears on the central display. On…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos