Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Ignition Coil in a Fiat Mobi

Model: Fiat Mobi MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Ignition coil

Video tutorial

This guide provides instructions for removing and replacing the ignition coil in a Fiat Mobi, following these simple steps. First, open the hood of your car and start unscrewing the mounting screws of the coil using a socket wrench and a ratchet; then disconnect the hoses and the electrical connector, as shown in the video.

At this point, remove and replace the coil with the new one, using the original replacement part; install the coil and reassemble everything by following the reverse procedure!


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in the Fiat Mobi?
How to Replace the Cabin Air Filter in the Fiat Mobi?
Fiat Mobi (2016-2024 / MK 1) In this tutorial, you will see how to replace the cabin air filter in the Fiat Mobi, a very simple and quick operation. First, locate the filter; it …
Replacing the Shift Knob on the Fiat Mobi
Replacing the Shift Knob on the Fiat Mobi
Fiat Mobi (2016-2024 / MK 1) In today's tutorial video, we will guide you through the steps to remove and replace the shift knob on the Fiat Mobi. First, get in the vehicle and s…
How to Replace the Key Fob Battery on a Fiat Mobi?
How to Replace the Key Fob Battery on a Fiat Mobi?
Fiat Mobi (2016-2024 / MK 1) As shown in this tutorial, replacing the key fob battery on a Fiat Mobi is a very simple and quick task. You will need a small flathead screwdriver a…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos